How to cut acrylic with cnc router?

Acrylic is one of the commonly used materials for CNC cutting and engraving. Cutting acrylic with a CNC router is a quick and efficient way to create a variety of projects and designs.

2023-01-10

How to improve the efficiency of metal laser processing?

Metal is a commonly used processing material in industrial production. But compared to other materials, metal laser processing usually takes longer than plastic and wood laser processing, and requires a higher laser power. How to improve the efficiency of

2023-01-10

How do I set up a laser engraver?

Setting up your laser engraver can be tricky when you're new to laser engraving, but the following steps can help you get started quickly.

2023-01-06

What is the common problem in gearbox?

There is a box outside the gearbox, and the box structure seals several gears inside, which plays a protective role and rarely fails. Therefore, the failure of the gearbox generally occurs on the gears and shafts.

2023-01-05

How to reduce rpm of ac motor?

In many industrial and commercial applications, lowering the RPM, or revolutions per minute, of an AC motor is a routine chore. From fans and pumps to conveyor belts and elevators, a vast range of machinery and equipment uses AC motors. An AC motor's RPM

2023-01-05

How to synchronize two ac motors？

The technique of synchronizing the rotational speed and phase of two AC (alternating current) motors so that they run at the same frequency and in phase with one another is known as synchronization. This is often carried out in situations when many motors

2023-01-05

What does a gearbox do?

A gearbox is a device that changes the transmission ratio and direction of motion. It can be used to change the torque, speed and direction of motion transmitted from the driving shaft to the driven shaft according to different working conditions.

2023-01-04

How to troubleshoot a ac motor?

Only skilled and seasoned specialists should undertake the hard process of troubleshooting an AC motor. It is possible to hurt yourself or damage the motor while trying to troubleshoot an AC motor since they are precision systems with several fragile comp

2023-01-04

How to select ac motor?

The performance and efficiency of the motor may be impacted by choosing the best AC motor for a certain application. When choosing an AC motor, there are several elements to take into account, including the kind of load, the required speed and torque, the

2023-01-04

How to calculate ac motor efficiency?

An essential step in establishing an AC motor's performance and potential energy savings is to calculate its efficiency. A motor's efficiency refers to how well it transforms electrical energy into mechanical motion; a motor that is more efficient will

2023-01-04

Does induction motor have magnets?

Induction motors use the principle of electromagnetic induction to generate a magnetic field instead of magnets, so induction motors do not have magnets in the traditional sense.

2023-01-03

Brushless DC gear motor vs. stepper motor-What’s the difference？

A stepper motor is a special DC brushless motor, but a stepper motor is a control motor, and there are many differences between it and a brushless motor.

2023-01-03

Sales case: Coupler production equipment motor

In August, an American customer who produced couplers left a message on the website asking about AC motors. After communication between the two parties, he chose AC reversible electrodes and purchased an additional 100 units after testing.

2023-01-02

Are servo motors brushless?

Servo motors can be brushed or brushless. Generally speaking, brushless servo motors have more advantages than brushed servo motors.

2023-01-02

What is AC synchronous motor used for?

AC synchronous motors are widely used in various industries due to their high efficiency, reliability and precise speed control.

2023-01-02

What is the effect of changing the laser frequency?

Laser engraving is a technology that uses laser to irradiate materials at high temperature to etch or mark materials. Changing the laser frequency during laser engraving will have a significant impact on the quality and accuracy of engraving.

2022-12-31

Does laser engraving last forever?

Laser engraving can create permanent marks, but these marks are often susceptible to external factors and cannot be permanently preserved. In order to ensure the service life of laser engraving, the specific use requirements and the durability of material

2022-12-30

Do induction motors have brushes?

In an induction motor, the rotor rotates due to the interaction between the stator and rotor magnetic fields, rather than by point brushes.

2022-12-29

Can a CNC router cut aluminum?

Aluminum is a lightweight and durable material, and it is also one of the processing materials for CNC routers.

2022-12-29

3 Laser Creative Food Ideas for Christmas

Food is an indispensable and important role in Christmas celebrations. If you want to innovate in food, laser engraving food will bring you a new feeling.

2022-12-28