Follow US
8613223710057
Copyright © Lunyee Industries Development Co.Ltd Tel：8613223710057
Copyright © Lunyee Industries Development Co.Ltd Tel：8613223710057
2023-02-28
The laser can cut or etch. The materials that the laser can cut materials like wood, paper, cork, and some kinds of plastics. Etching can be done on almost anything, wood, cardboard, aluminum, stainless steel, plastic, marble, stone, tile, and glass.
Read more2023-02-27
The spindle motor is an essential component of a CNC machine. It is responsible for rotating the cutting tool and controlling the speed of the cutting operation
Read more2023-02-27
Stepper motors are commonly used in a wide range of applications, including robotics, automation, and precision control systems. Among the different types of st
Read more2023-02-24
American consumer Hans contacted our Changzhou Lunyee website in January 2022 with a request for information about two different motor types to replace the ones he was presently using. After exchanging messages, we discovered that Hans is a producer in th
Read more2023-02-23
A servo motor can usually only turn 90° in either direction for a total of 180° movement. The motor's neutral position is defined as the position where the servo has the same amount of potential rotation in the both the clockwise or counter-clockwise dir
Read more2023-02-23
Stepper motors are electric motors that are designed to rotate in precise increments, or steps, rather than continuously. These motors are widely used in a vari
Read more2023-02-23
A stepper motor driver is a device that is used to control the movement of a stepper motor. Stepper motors are motors that can be rotated in precise increments
Read more2023-02-21
When it comes to choosing the right type of motor for a specific application, it can be difficult to decide between servo and stepper motors. Both types of moto
Read more2023-02-21
A stepper motor is a type of electric motor that is able to rotate in precise, discrete steps, rather than continuously rotating like traditional motors. Steppe
Read more2023-02-21
Acrylic can be cut using CNC mills or CNC lathes. CNC lathes are generally used for softer materials like wood, foam, plastic, and aluminum, and rotate the part using a stationary tool. A CNC milling machine is very precise because it uses a multi-point c
Read more2023-02-20
A CO2 laser cutter can engrave wood, plastic, and metals, including stainless steel. However, a CO2 laser cannot engrave the metal directly as the laser beam reflects from the surface. In order to engrave stainless steel, the material must first be pre-tr
Read more2023-02-20
Stepper motors are a popular choice for a wide range of applications due to their precise positioning and control. However, it is not uncommon for stepper motor
Read more2023-02-20
Microstepping is a technique that is used to increase the precision of a stepper motor. Stepper motors are able to rotate in precise, discrete steps, making the
Read more2023-02-17
Motor speed controllers are electronic devices that control motor speed. They take a signal for the needed speed and drive a motor to that speed. There are a variety of motor speed controllers available.
Read more2023-02-17
How it works. To actually achieve torque at the motor shaft, a current is applied across the stator. This creates a rotating magnetic field which in turn induces a current in the rotor. Because of this induced current, the rotor also creates a magnetic fi
Read more2023-02-15
Laser engraving makes indelible marks on the item through the production of a lot of energy targeted at a very small area. This focused energy leaves a permanent mark by melting, heating, vaporizing or burning the top layer of the material. However, the p
Read more2023-02-15
Why Does My Stepper Motor Vibrate?Stepper motors are a popular choice for a wide range of applications due to their precise positioning and control. However, st
Read more2023-02-15
This post will look at why stepper motors may be loud and what can be done to decrease noise.
Read more2023-02-14
It is critical to pick a stepper motor for your CNC router that is adequately suited for the machine and your unique demands. In this post, we'll go through how to choose the correct size stepper motor for your CNC router.
Read more2023-02-14
A hybrid stepper motor is an electric motor that combines the best characteristics of two kinds of stepper motors: permanent magnet stepper motors and variable reluctance stepper motors.
Read more
