Model | LY-DC-62F |
Motor power | 1500 W |
Rated voltage | 220V AC |
Phase | Three phase |
Max speed | 60000 rpm |
Max current | 10 A |
Max frequency | 1000 Hz |
Torque | 0.28 N·M |
Cone at the end of the shaft pulsates | ≤0.001 mm |
Tooling releasing air pressure | 5.6-6.0 Kgf/cm² |
Tooling change method | Automatic tool changer |
Tooling pulling force | ≥1200 N |
Tooling back air pressure | No |
Tooling connection | Φ3- Φ6 collet |
Cooling | Water cooling |
Encoder | No |
Coolant pressure | ≥2.5 Kgf/cm² |
Approach switch | No |
Bearing lubrication method | Grease |
Balance level | G1 |
Install method | Clamp |
Vibration Value | ≤0.8 mm/s |
Weight | 3.9 Kg |
0086 138 3852 9852
86 138 3852 9852
Zhengzhou,China
If you are interested in our company or products, you can contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
Consumer Satisfaction
This data is provided by other platform research